On this page
7.12Thermal printer not printing: six checks
The customer is waiting and nothing comes out of the printer. Before calling a mechanic, go through these six checks in this order. The first four are about the printer and Windows. Most faults turn up there.
| Check | What to do |
|---|---|
| 1. Paper | Is the printer light on? Has the roll run out? Is the roll the wrong way round? Thermal paper prints on one side only. Scratch it with a fingernail: the side that turns dark must face the print head. |
| 2. Cable | Pull out both ends of the cable and push them in firmly. Try another USB port on the PC. |
| 3. Offline or Paused | Open the Windows printers list (Control Panel → Devices and Printers, or Settings → Printers & scanners). If the bill printer says Offline or Paused, resume it. Open its queue and cancel old stuck documents, or every new bill waits behind them. POS slips show in the queue as "Raw Document". |
| 4. Windows test page | In the printer's properties press Print Test Page. The test page prints: the printer is fine, and the fault is in a setting (checks 5 and 6). No test page either: the printer or its driver needs your dealer or the printer service. |
| 5. Paper size | In the printer's Printing Preferences the paper size must match the roll, 58 mm or 80 mm. A wrong size can cut the bill short or print it blank. |
| 6. Speed Plus | Help → Manage Bill Formats, click the entry (POS or Sale). With Thermal (Receipt Printer), the Printer / COM port must name this printer and the Paper width must match the roll. Other print types go to the Windows default printer. At the POS, also check that Print Bill is on (13.9). |
What you see often points straight to the cause:
Read every step in the guide: Printing Formats, section 7.12
Questions and answers
The thermal printer prints nothing. Where do I start?
Go through the six checks in 7.12 in order: paper, cable, Offline or Paused, Windows test page, paper size, then the Printer / COM port and Paper width in Help → Manage Bill Formats.
A blank slip comes out of the thermal printer.
The roll is in the wrong way round. Scratch the paper with a fingernail; the side that turns dark must face the print head.
The slip prints with broken lines and the right side missing.
Paper width is set to 3 Inch on a 58 mm printer. In Help → Manage Bill Formats → POS choose 2 Inch (58mm).
The printer printed the previous bill, or a blank bill. Why?
Print.exe started before the new bill reached it. Version 261030 hands each job to Print.exe with its own number (7.8). Update with Help → Check for Updates and ask your dealer whether your Print.exe is the current one; an old Print.exe ignores the job number. If it still happens, send your dealer the last lines of print.log.
The POS stopped printing after Windows reinstalled the printer.
Windows may have given the printer a new name. Open Help → Manage Bill Formats → POS and pick the printer again in Printer / COM port.
The thermal printer does not cut between copies.
The POS thermal slip cuts after every copy only on a printer with a cutter; many 58 mm printers have none. If the POS prints through a Crystal design, switch on "cut after document" in the printer driver. The regular Sale bill screen sends all copies in one job, so the cut comes at the end.